By placing an order, you are agreeing to our privacy policy and terms of service.
- BlackStop Wraparound Design: Single-piece enclosure darkens the space for a cleaner, more immersive setup.
- Borderless Impact Screen: Heavy-duty, hand-sewn triple-layer screen with noise dampening.
- Up to 20-Foot Widths: Four depth options scale from luxury basements to commercial academies.
- Commercial-Grade Durability: Withstands thousands of high-speed strikes for long-term use.
- Free Shipping: Ships FREE to your door.
Pro Golf Simulator Enclosure
The Pro is Carl's Place's premium, commercial-grade enclosure — a rigid frame and higher screen tension that deliver a flatter surface and a more finished look. Built for dedicated simulator rooms, golf academies, and luxury home bays where image quality and appearance matter most.
Every kit ships with a hand-sewn triple-layer impact screen, the single-piece BlackStop™ wraparound enclosure, and steel corner fittings — made in the USA. It is the right pick if you want a pro-grade bay and are comfortable sourcing or adding the 2-inch EMT frame that provides its rigidity.
- BlackStop™ single-piece wraparound darkens the room for deeper contrast and immersion
- Two premium, triple-layer screens — Premium and High-Contrast Gray
- 18 sizes in 5 ft and 8 ft depths, custom to 20 ft
- Hand-sewn and made in the USA
Authorized Carl's Place dealer · Free shipping · Affirm financing
Carl's Place Pro Kit Assembly
See how the rigid frame, BlackStop™ wraparound, and triple-layer screen go together on the 2025 Pro model.
Built for a Finished, Pro-Grade Bay
BlackStop™ Wraparound
A single-piece enclosure wraps the whole bay in black-out fabric, darkening the room for deeper contrast and a cleaner, more immersive picture.
Triple-Layer Premium Screen
A hand-sewn, three-layer impact screen delivers a sharp, detailed image and quiet, controlled impact — in Premium or ambient-light-ready High-Contrast Gray.
Borderless Floor-to-Turf
An advanced cabled design pulls the image to the floor with no bottom border, so the picture blends into your turf for full immersion.
Rigid 2-Inch EMT Frame
Heavier 2-inch steel EMT and higher screen tension hold the surface flatter than a standard build — the difference you see in a projected image.
Detachable Flaps
Secure fasteners keep the side flaps and foam neatly in place, giving the finished bay a polished, professional appearance.
Sized for Home & Commercial Bays
Eighteen sizes in 5 ft and 8 ft depths, customizable up to 20 ft wide or deep, fit everything from a home room to a commercial venue.
Space You Will Need
Measure before you buy. These are the manufacturer's clearances for a safe, well-tensioned Pro bay — plan your room around them and the build goes smoothly.
Who the Pro Enclosure Is Built For
The Commercial Operator
You run a facility that needs a durable, professional-looking bay built to take heavy daily use and look sharp for paying customers.
The Golf Academy
You teach and fit, and you want a flat, true screen surface and a clean overhead sightline for a launch monitor and lesson video.
The Luxury Home Build
Your dedicated sim room is a showcase. You want a more finished look and a darker, more immersive image in the space.
The Upgrader
You have run a net or a DIY bay and you are ready for the flatter surface, rigid frame, and polished finish of the Pro tier.
Carl's Place impact screens take real golf balls at full driver speed. Take your fastest swings — the BlackStop™ wraparound and released-tension design catch and absorb what the screen does not, protecting your room and gear.
Specifications
In the box: premium triple-layer impact screen, BlackStop™ black nylon enclosure, steel corner fittings, all required zip ties, and detailed assembly instructions. Optional add-ons include pre-cut EMT frame pipes, foam inserts, safety baffles, a back cover kit, and a Movable Crossbar sized to hold an overhead launch monitor.
Which Carl's Place Enclosure Is Right for You
| Feature | Pro (from $3,409.95) | DIY C-Series (from $999.95) | Built-In Room Kit (from $480) |
|---|---|---|---|
| Type | Freestanding, premium | Freestanding DIY kit | Permanent built-in |
| Frame | Rigid 2-inch EMT | 1-inch EMT (you build) | Mounts to your wall |
| Screen | Premium/Gray triple-layer | 4 materials | Screen sold to fit |
| Screen Surface | High tension, flatter | Ball-bungee tension | Wall-flat |
| Look | More finished (BlackStop™) | Functional | Fully built-in |
| Install Effort | Moderate assembly | One afternoon, DIY | Carpentry required |
| Best For | Premium & commercial | Budget first build | Permanent dedicated room |
On a tighter budget? The Carl's Place DIY Golf Simulator Enclosure builds a solid bay for less. Building the sim into a wall? See the Carl's Place Built-In Golf Room Kit. Just need the screen? Shop Carl's Place golf impact screens.
From Box to First Swing
1. Measure Your Space
Confirm 10–12 ft of hitting distance, 2–3 in. of side buffer, 6 in. above the enclosure, and 12–16 in. behind the screen.
2. Build the 2-Inch Frame
Cut 2-inch EMT to the included plan — or add the pre-cut Pipe Framing Kit — sized 4 in. taller and wider than the screen.
3. Wrap the BlackStop™
Hang the single-piece BlackStop™ enclosure on the frame with the steel corner fittings and secure the detachable flaps.
4. Tension the Screen
Hang the triple-layer screen and pull it taut with the 6 in. ball bungees for a flat, even, distraction-free surface.
5. Aim the Projector
Center the projector on the screen and dial in the image. Darker rooms — or the High-Contrast Gray screen — give the deepest blacks.
6. Let It Settle
Give the screen a couple of days under tension to relax any wrinkles, keep new balls clean, and you are set for thousands of swings.
Build a Commercial-Grade Bay
The premium Carl's Place enclosure in your exact size, made in the USA and backed by an authorized dealer. Ships free. Financing available through Affirm.
Choose Your Size & ScreenPlan Your Golf Room
Everything you need to size the room, pick a screen, and dial in your projector.
Golf Simulator Room Size
The minimum ceiling, width, and depth you need for a safe home setup.
Projector + Screen Pairing
How to match your screen material and projector for the sharpest image.
Projector Distance & Mounting
Throw distance, mounting, and image size for a perfectly filled screen.
Beating Ambient Light
Where the High-Contrast Gray screen shines in bright or garage rooms.
Your Purchase is in Good Hands
1-888-871-6110
From your first question to install day, we help you build the golf room you have been planning — not just ship you a box. Call us and we will help you size and finish your Pro bay the right way.
Frequently Asked Questions
Each kit includes the premium triple-layer impact screen in your chosen material, the BlackStop™ single-piece black nylon enclosure, steel corner fittings, all required zip ties, and detailed assembly instructions — made in the USA. The 2-inch EMT frame pipe is supplied by you or added as an optional Pipe Framing Kit.
Plan for 10–12 ft of hitting distance from the screen, 2–3 in. of buffer on each side, 6 in. of buffer above the enclosure, and 12–16 in. of clearance behind the screen. Build the frame 4 in. taller and wider than the screen for even tension with the 6 in. ball bungees.
Both are hand-sewn, triple-layer premium screens. The Premium screen is the standard pick for most rooms. High-Contrast Gray uses the same three-layer build but delivers deeper blacks and crisper color, which helps most in rooms with ambient light.
The Pro frame is built from 2-inch steel EMT, which you can buy locally to save money using the included plan, or add the pre-cut Pipe Framing Kit for a no-measuring, no-cutting build. The kit includes the steel fittings and fasteners either way. Do not substitute PVC — it will not work with the fittings.
The Pro uses a rigid 2-inch EMT frame with higher screen tension for a flatter surface and a more finished look, plus the BlackStop™ wraparound. The Carl's Place DIY (C-Series) uses a simpler 1-inch frame and is the budget-friendly starting point. Choose Pro for dedicated rooms where screen quality and appearance matter most.
Yes. The optional Movable Crossbar is built to hold overhead launch monitors and includes the fittings, pipes, and a fabric sleeve sized to your enclosure for a clean, pro-level look. It positions the unit over the hitting area without adding clutter to the bay.
For the safety of both the golfer and the screen, the manufacturer recommends standing a minimum of 10–12 ft from the screen. This distance also helps prevent premature wear on the material.
The manufacturer does not recommend ironing the screen, as it is easy to damage. Mounting the screen under tension and letting it relax for a couple of days smooths out most wrinkles. A clean, consumer-grade steamer with distilled water can speed up the process without leaving water marks.
Use new golf balls free of scuffs, grass stains, or marker, and keep your clubs clean. Protect the edges and grommets from direct strikes. Impact screens are wearable products and may show wear early with heavy use, but they are built to withstand many thousands of strikes over their life.
Yes. We offer financing through Affirm with flexible monthly payments. Select Affirm at checkout to check your rate in seconds — it will not affect your credit score. Zero percent APR options may be available depending on eligibility.
Carl's Place impact screens and enclosure materials are wearable products and do not carry a warranty, and all impact screen sales are final with no returns. Because fit and material choice matter, measure your space and pick your screen carefully before ordering, or call us at 1-888-871-6110 and we will help you choose.
Explore more golf simulator enclosures or call us at 1-888-871-6110
