By placing an order, you are agreeing to our privacy policy and terms of service.
- Edge-to-edge panorama: The curved screen envelops your field of vision, putting the entire fairway in view for true on-course depth.
- Tour-tough construction: Heavy-duty impact fabric and a rigid steel frame shrug off 250 mph shots yet assemble in a single afternoon.
- Home charm, commercial muscle: Sleek enough for a living room bay, rugged enough for nonstop play in revenue-driving studios.
Curved Golf Simulator Enclosure Kit
The Carl's Place Curved Golf Enclosure Kit wraps your impact screen in a gentle curve for a panoramic, wraparound view that keeps more of the course in your peripheral vision. Built around a triple-layer impact screen rated to 250 mph and designed for DIY installation, it turns a spare room, garage, or basement into a complete home golf bay.
Made in the USA and offered in 18 sizes with two screen choices, the curved design adds a sense of depth a flat screen cannot, so serious home golfers get a finished, full-size setup without hiring a contractor.
- Curved wraparound design pulls the screen around your stance for a deeper, more enveloping view than a flat panel
- Triple-layer impact screen rated to 250 mph ball speed
- 18 sizes — 14 to 17 ft wide, up to 15 ft deep, in two screen choices
- DIY-friendly, hand-sewn, and made in the USA
Authorized Carl's Place dealer · Free shipping · Affirm financing available
How to Assemble the Curved Enclosure
See Carl's Place walk through the full step-by-step assembly of the Curved kit, from frame to tensioned screen.
A Screen That Wraps Around Your Swing
The curve is not just for looks. Angling the side panels forward brings the edges of the image around you, so the course spans more of your view instead of ending at a flat rectangle.
Panoramic Curved View
The gentle wrap draws the projected image into your peripheral vision for a stronger sense of standing on the course.
Triple-Layer Impact Screen
A cushioned center layer absorbs and quiets impact, rated to withstand thousands of strikes at up to 250 mph while holding a crisp image.
Built for DIY Installation
Ships as a complete kit with steel corner fittings, zip ties, and detailed instructions — no contractor and no proprietary tools required.
Made in the USA
Each impact screen and single-piece BlackStop™ enclosure is manufactured by Carl's Place in the United States to a consistent, tested standard.
18 Sizes for Any Room
From 14 to 17 feet wide and 8 to 15 feet deep, in 9, 9.5, and 10-foot heights — pick the footprint that fits your space, not the other way around.
Two Screen Choices
Choose the Premium triple-layer screen or the High-Contrast Gray screen for added image depth and clarity in brighter, well-lit rooms.
Space You Will Need
The Curved kit uses depth to create the wrap, so plan for room behind the hitting area as well as width and ceiling height.
The curve is formed by the side walls angling back, so a deeper footprint produces a fuller wraparound — shallower rooms still work with the 8 ft depth. Not sure which footprint fits? See our golf simulator room size guide for minimum dimensions before you choose a size.
Who the Curved Enclosure Is Built For
The Realism-First Golfer
You want the game to feel real. The wraparound curve fills your view and closes the gap between a screen and a course.
The Dedicated-Room Builder
You have a spare room, garage, or basement set aside for a permanent bay and want it to look and play like a finished studio.
The DIY Installer
You would rather build it yourself over a weekend than pay a contractor, and you want a complete kit with clear instructions.
The Serious Home Golfer
You practice year-round and want a durable, triple-layer screen that holds up to daily driver swings without wearing out.
The impact speed the triple-layer screen is built to take repeatedly, so it stays taut and quiet long after cheaper single-layer screens stretch or tear.
Specifications
Which Carl's Place Enclosure Is Right for You
| Feature | Curved Kit (from $4,894.95) | Pro Enclosure (from $3,409.95) | DIY C-Series (from $999.95) |
|---|---|---|---|
| Screen Shape | Curved / wraparound | Flat | Flat |
| Immersion | Panoramic | Standard | Standard |
| Impact Screen | Triple-layer, to 250 mph | Triple-layer, to 250 mph | Triple-layer, to 250 mph |
| Enclosure | Single-piece BlackStop™ | Single-piece BlackStop™ | BlackStop™ |
| Frame | 2 in EMT | 2 in EMT | 1 in EMT |
| Installation | DIY | DIY | DIY |
| Best For | Maximum immersion in a dedicated room | A finished, pro-grade flat bay | The most affordable complete enclosure |
All three are complete, made-in-USA Carl's Place kits with the same triple-layer impact screen. Choose the Curved Kit for wraparound immersion, the Pro Enclosure for a finished flat bay, or the DIY C-Series to get started for less. Compare everything in the golf enclosures collection.
From Box to First Swing
1. Measure Your Room
Confirm your width, depth, and ceiling height, and leave clearance behind the hitting area for the curved side walls.
2. Choose Your Size
Select from 18 configurations and pick the Premium or High-Contrast Gray screen for your lighting.
3. Build the Frame
Assemble the 2 in EMT frame with the steel corner fittings — supply your own pipe or add the Pipe Framing Kit.
4. Mount the Screen
Attach the triple-layer impact screen and tension it evenly across the curved frame for a flat, wrinkle-free image.
5. Wrap the Enclosure
Secure the single-piece BlackStop™ enclosure with the included zip ties to trap light and contain errant shots.
6. Align and Play
Position your projector and launch monitor, dial in the image, and take your first swing.
Build Your Curved Golf Bay
The Curved enclosure in your exact size, with a triple-layer impact screen made in the USA and backed by an authorized dealer. Ships free. Financing available through Affirm.
Choose Your Size & ScreenPlan Your Golf Room
Everything you need to size, build, and set up a simulator bay before you order.
Golf Simulator Room Size
The minimum width, depth, and ceiling height you need before choosing an enclosure size.
Building a Simulator Room
A room-by-room walkthrough of layout, PC, projector placement, and installation.
Fixed vs Retractable Screens
How a permanent enclosure compares to a retractable screen for a multi-use room.
Your Purchase is in Good Hands
1-888-871-6110
Frequently Asked Questions
The Curved kit angles its side walls back so the impact screen wraps gently around the hitting area. That wraparound fills more of your peripheral vision, adding depth and realism a flat screen cannot — while using the same triple-layer impact screen as our flat enclosures.
Each kit includes the triple-layer impact screen in your chosen material, the single-piece BlackStop™ enclosure, steel corner fittings, all required zip ties, and detailed assembly instructions — made in the USA. The 2-inch EMT frame pipe is supplied by you or added as an optional Pipe Framing Kit.
There are 18 size configurations: 14 to 17 feet wide, 8 to 15 feet deep, in 9, 9.5, and 10-foot heights. Each size is also offered with either the Premium or High-Contrast Gray screen, so you can match the kit to your exact room.
Both are triple-layer impact screens. The Premium screen is the standard bright-white surface; the High-Contrast Gray Premium Golf Screen adds image depth and clarity in brighter, well-lit rooms by deepening blacks and reducing washout.
Plan for the size you choose plus clearance behind the hitting area for the curved side walls. The smallest footprint is 14 feet wide by 8 feet deep at 9 feet tall; deeper rooms produce a fuller wraparound. See our golf simulator room size guide for minimum swing and ceiling clearances.
The kit is built around a 2-inch EMT steel pipe frame. You can source the pipe locally to save on shipping, or add the optional Pipe Framing Kit to receive everything pre-measured. The steel corner fittings, zip ties, and instructions are always included.
Yes. The Curved enclosure is designed for DIY installation and ships with detailed instructions. Most builders complete assembly with basic hand tools over a weekend — no contractor and no proprietary hardware required.
The Curved kit is the enclosure and screen. To finish a full bay you add a launch monitor, a short-throw projector, a hitting mat, and a PC or tablet to run your sim software. Our team can help you match compatible components to your room.
For the safety of both the golfer and the screen, the manufacturer recommends standing a minimum of 10 to 12 ft from the screen. This distance also helps prevent premature wear on the material.
The manufacturer does not recommend ironing the screen, as it is easy to damage. Mounting the screen under tension and letting it relax for a couple of days smooths out most wrinkles. A clean, consumer-grade steamer with distilled water can speed up the process without leaving water marks.
Use new golf balls free of scuffs, grass stains, or marker, and keep your clubs clean. Protect the edges and grommets from direct strikes. Impact screens are wearable products and may show wear early with heavy use, but they are built to withstand many thousands of strikes over their life.
Yes. Affirm financing is available at checkout, so you can spread the cost of your enclosure and simulator build into fixed monthly payments. Choose Affirm at checkout to see your options.
Carl's Place impact screens and enclosure materials are wearable products and do not carry a warranty, and all impact screen sales are final with no returns. Because fit and material choice matter, measure your space and pick your screen carefully before ordering, or call us at 1-888-871-6110 and we will help you choose.
Explore every option in our golf simulator enclosures collection or call us at 1-888-871-6110
