Skip to content
Cart
cload
Checkout Secure

FlightScope Mevo Gen2 vs FlightScope X3C

Both are hybrid radar + camera units (behind the ball). Below: what each one does better, today's prices, the 3-year cost with each maker's plan, and the room each needs.

Pick the FlightScope Mevo Gen2 for

  • a lower price today: $12,196.00 less

On room, software cost, PC, setup, putting, swing video and markers neither one has an edge in the makers' data; the price is the difference. "Best for" below shows what sets each apart.

FeatureFlightScope Mevo Gen2 $1,299.00 FlightScope X3C $13,495.00
Best forMid-range portable Fusion radar-plus-camera, indoor + outdoor, no subscription Pro-level radar+camera fusion with 50+ parameters
SensorHybrid radar + camera Hybrid radar + camera
PlacementBehind the ball Behind the ball
Setup position8 ft behind the ball 8-12 ft behind ball (5 ft for short game)
Room needed18'D 18'D
SpinMeasured Measured
Yearly software costNone needed None needed
3-year cost$1,299.00 $13,495.00
Own app runs onWindows PC, iPhone/iPad, Android Windows PC, iPhone/iPad, Android
Third-party sim softwareE6 Connect, GSPro, Awesome Golf, Creative Golf E6 Connect, GSPro, TGC 2019, Awesome Golf, Creative Golf
PC neededOnly for PC software (gaming PC for GSPro, Creative Golf) Only for PC software (gaming PC for GSPro, TGC 2019, Creative Golf)
Lefty + righty without moving itYes Yes
PuttingYes Yes
Swing videoYes Yes
Marked balls / stickersBall: aluminum sticker (or Titleist RCT ball) for limited flight / indoor spin; not when putting; Club: none Ball: aluminum sticker (or Titleist RCT ball) in limited flight / indoor; not for chipping and putting; Club: none
IndoorYes Yes
OutdoorYes Yes
Owner's manualFlightScope Mevo Gen2 manual FlightScope X3C manual

Prices are today's prices here. Software plans are each maker's own, read from their current pages; the 3-year cost is today's price plus three years of the plan the maker needs for course play on its own software. Room needs are the minimums on our launch monitor comparison. A dash means the maker does not publish it.