Easy to install. Now I’m set to improve my game!
3D · drag to rotate
By placing an order, you are agreeing to our privacy policy and terms of service.

Snow on the driveway, a Tuesday night, and you are still hitting driver, with the SkyTrak ST MAX set up beside the ball. Choose the screen size, mat and projector here, watch the build take shape in 3D at real size, and check out without waiting on a quote.
The SkyTrak ST MAX DIY Enclosure Golf Simulator starts with the SkyTrak ST MAX launch monitor, a Carl's Place DIY screen and enclosure in six sizes and four screen grades, and the Optoma ZW351ST-B short-throw laser projector. Frame pipe, hitting mat and ceiling mount are sold separately; add all three on this page in one tap.
Every pick updates the price and the 3D view, and the whole build goes to your cart as one package. It is for the golfer who wants one order for the whole room instead of sourcing a screen, frame, mat and projector separately.
Use the builder above to change the enclosure or projector, or add a frame, enclosure extras, hitting mat, landing pad, projector ceiling mount, gaming computer or touch screen monitor.

The SkyTrak ST MAX sits beside the ball: its photometric camera measures the ball and its dual Doppler radar reads the club, for ball and club data from one unit.
The exclusive Speed Training Powered by GOLFTEC is built in to help you build measurable swing speed, and no special balls are needed, just a clean white ball.

The Carl's Place DIY Golf Simulator Enclosure builds a clean, fully contained hitting bay. Every kit ships with the impact screen, enclosure panels and steel fittings, starting on the Standard screen. The pipe framing kit, foam inserts, 8' net wall extensions and safety baffle are sold separately. BlackStop light-absorbing fabric keeps the picture bright with less bounce-back.
Room minimum, to the inch. Width is Carl's overall frame plus a 3 in buffer on each side; height is the frame plus 3 in above.
Depth is 1 ft behind the screen, 10 ft from the screen to the ball (the closest Carl's says to hit from) and 5 ft behind the ball to swing, which is 16 ft 0 in for every size.
Carl's Place recommends 7 ft behind the tee for a full driver swing, which makes it 18 ft 0 in. Figures are rounded up to the next inch.

The hitting mat is sold separately. The builder offers the Real Feel Country Club Elite Golf Mat, 5'W x 5'L; its long, dense fibers let you swing down and through the turf the way you would off a fairway, it takes a real wooden tee, and its cushioned base softens the strike.
Three Fiberbuilt mats are offered there too:
The Tour Landing Pad cushions and quiets balls dropping off the screen, keeps them from scuffing the floor, and bridges the gap between the mat and the enclosure. The builder offers the width that matches your bay, always 8 ft long:

The Optoma ZW351ST-B is the included projector: 3,600 lumens, a 30,000-hour DuraCore laser with no bulb to replace, and a 0.521:1 short throw, so it mounts close to the screen and out of the swing.
Seven BenQ short-throw projectors are available in the builder, from the 1080p TH671ST to the 5,100-lumen 4K LK936ST, and the ceiling mount switches to the right model for whichever projector you choose. Remove the projector and the mount goes with it. The projector calculator shows the mount distance for your screen size.

SurfThing builds the gaming-class computers offered here for golf simulation: 32GB DDR5, a 2TB SSD and an NVIDIA RTX 50-series GPU, in a desktop tower or a laptop. With the desktop PC, add the SurfThing DT2424H 23.8-inch touch screen to start rounds, review data and scrub swing video without walking back to a keyboard.
It is not offered with the laptop, which has its own screen.
Buy the SkyTrak ST MAX DIY Enclosure Golf Simulator if you want the ST MAX, a Carl's Place DIY screen and enclosure and a short-throw laser projector in one order, with the launch monitor beside the ball where it adds no room depth.
It fits first-time simulator builders with a room at least 16 ft 0 in deep (18 ft 0 in for a full driver swing), and golfers who want one cart for the whole bay instead of sourcing a screen, frame and projector separately. Best for players chasing more swing speed, with GOLFTEC Speed Training built into the ST MAX.
| Feature | SkyTrak ST MAX DIY | Uneekor EYE MINI LITE DIY | Bushnell Launch Pro DIY |
|---|---|---|---|
| Price | $3,443.96 (8'W x 8'H x 5'D) | $3,447.96 (8'W x 8'H x 5'D) | $4,747.96 (8'W x 8'H x 5'D) |
| Tracking type | Photometric camera for the ball, dual Doppler radar for the club, beside the ball | Dual infrared cameras, beside the ball | Three cameras with infrared, beside the ball |
| Enclosure | Carl's Place DIY, six sizes from 8'W to 13'W, Standard screen to start | Carl's Place DIY, six sizes from 8'W to 13'W, Standard screen to start | Carl's Place DIY, six sizes from 8'W to 13'W, Standard screen to start |
| Projector | Optoma ZW351ST-B laser, 3,600 lumens; ceiling mount sold separately | Optoma ZW351ST-B laser, 3,600 lumens; ceiling mount sold separately | Optoma ZW351ST-B laser, 3,600 lumens; ceiling mount sold separately |
| Minimum room depth | 16 ft 0 in (18 ft 0 in for a full driver swing) | 16 ft 0 in (18 ft 0 in for a full driver swing) | 16 ft 0 in (18 ft 0 in for a full driver swing) |
| Club data | Read by dual Doppler radar | Club stickers recommended (a set comes in the box) | Foresight+ Silver or Gold membership, plus club marker stickers |
| Indoor or outdoor | Both; keep direct sunlight off the lens outdoors | Indoor only | Both |
| Best for | Camera ball data and GOLFTEC Speed Training at the lowest DIY price of the three | A permanent indoor build with camera data | Sim room plus range and course use |
Compare in depth: Uneekor EYE MINI LITE DIY and Bushnell Launch Pro DIY, or see the launch monitor alone on the SkyTrak ST MAX page.
The SkyTrak ST MAX sits beside the ball, level with the hitting surface, so it adds no depth behind you. Room depth below comes from each format's own net or screen setup and swing clearance, not from the ST MAX.
The ST MAX sits beside the ball rather than behind it, but the golfer's swing still needs clearance behind the ball: Carl's Place gives 4 ft as a minimum and recommends about 7 ft.
Every width of the Net Return Floating Screen Simulator Bay fits at 14 ft, with 18 ft for a full driver swing. The ST MAX sits beside the ball at that same depth.
The Carl's DIY kit fits at 16 ft 0 in, with 18 ft 0 in for a full driver swing. The ST MAX sits beside the ball rather than behind it, so it adds nothing on top of that figure.
The Pro enclosure needs at least 16 ft 0 in of room depth, and a launch monitor beside the ball adds nothing to it.
Also at least 16 ft 0 in. Carl's curved kits run 14 ft to 17 ft wide, which leaves room on either side of a centered tee for the ST MAX beside the ball.
Carl's plans a Built-In room as 12 in behind the screen for buffer space plus 6 in to install the flaps, at least 10 ft from the screen and 7 ft of swing room in every direction. The ST MAX sits beside the ball.
Our pick: the Carl's DIY kit, our best seller, which fits at 16 ft 0 in, with 18 ft 0 in for a full driver swing, or the Floating Screen, which minimizes bounce-back for tighter rooms.
Enter your own room width, ceiling and depth in the golf simulator builder, or read the golf simulator room size guide first.
Before you order, see the screen, the mat, the projector on its mount and the launch monitor drawn at real size, each where it goes.
The second gallery thumbnail opens an interactive 3D view of your build at real size, with the SkyTrak ST MAX where it belongs: beside the ball. Drag to rotate, pinch or scroll to zoom, open it full screen.
Share build saves the configuration to a short topshelfgolf.com link with a picture, for a spouse, a contractor or us, and the link rides along on your cart line and order.
From the moment you first contact us, we offer the very best advice and service to find the right product at the right price. We do not just sell boxes -- we help you build the sim room you have been planning.
All six: Net, Floating Screen, DIY Enclosure, Pro Enclosure, Curved Screen and Built-In Screen. The ST MAX sits beside the ball instead of behind you, so it adds nothing on top of each format's own room depth: at least 16 ft 0 in for the Pro Enclosure, the Curved Screen and the Carl's DIY kit, with 18 ft 0 in for a full driver swing for the DIY kit. A floating-screen bay fits at 14 ft, with 18 ft for a full driver swing.
Only what the enclosure itself needs: at least 16 ft 0 in in the Pro Enclosure, the Curved Screen or the Carl's DIY enclosure, with 18 ft 0 in for a full driver swing in the DIY enclosure. A floating-screen bay fits at 14 ft, with 18 ft for a full driver swing. Carl's plans a Built-In room as 12 in behind the screen for buffer space plus 6 in to install the flaps, at least 10 ft from the screen and 7 ft of swing room in every direction. The ST MAX sits beside the ball, level with the hitting surface, so it adds no depth behind you.
Yes, at a room depth of at least 16 ft 0 in. Carl's curved kits run 14 ft to 17 ft wide, which leaves room on either side of a centered tee for the ST MAX beside the ball.
We're proud to say we are an Authorized Dealer/Distributor for all the brands we carry. Your launch monitor, projector and computer are covered by their manufacturer's warranty from the date of the original purchase, subject to its conditions and limitations. Carl's Place screens and enclosure materials are covered for manufacturing defects; the warranty does not cover normal wear. Some marking and wear from the first sessions is normal, and how long a screen lasts depends on skill level, how often you play and how it is installed. If something looks unusual rather than like normal wear, send us photos and your order number and we will take it up with Carl's Place.
Returns follow our Return Policy, and a screen that has been hit cannot be returned. Because fit and material choice matter, measure your space before ordering.
We want you to be happy with your purchase and enjoy it for many years to come. If you decide you want to return your product, we will gladly assist you in the process. Please inspect your purchase when your package arrives. Product received damaged must be noted with the freight carrier at time of delivery. Contact us immediately to report the damage. We cannot accept responsibility for a damaged shipment if it is not noted as such on the freight carrier's delivery receipt. Damage must be noted at the time of delivery.
For additional details about our return process & exceptions for all the items included in the package please see our Return Policy.
Browse every golf simulator package or call us at 1-888-871-6110.