Upgraded this year to the PerfectBay enclosure from the net return and absolutely love it.
3D · drag to rotate
By placing an order, you are agreeing to our privacy policy and terms of service.

The screen curves around you, so the picture reaches into your peripheral vision for a wider visual range than a flat screen gives. Carl's Place builds the Curved enclosure for home rooms and commercial simulator bays alike. Configure it here, see it in 3D and buy it without waiting on a quote.
A Carl's Place Curved enclosure in 18 sizes, 14 to 17 ft wide and 8, 10 or 15 ft deep, the 2-inch steel Pipe Framing Kit and Safety Baffle for that size, a Real Feel hitting mat, the BenQ LK830ST 4K short-throw laser projector with its ceiling mount, and the launch monitor of your choice from 22 radar, camera and overhead units.
Every pick updates the price and the 3D view, and the whole build goes to your cart as one package. The starting price is the base 14'W x 9'H x 8'D enclosure, pipe kit, baffle, mat, LK830ST and mount at their live prices, so a sale on any part shows here the same day.
*Note: Change the enclosure size, hitting mat or projector in the builder.
The Curved enclosure pairs with a premium launch monitor: the Foresight Sports GCQuad and QuadMAX, the Uneekor EYE XO2 or the Foresight Sports Falcon. All 22 units in the dropdown are grouped below by where they sit, so pick the group that fits your room, then the unit.
FlightScope X3C, Full Swing KIT, FlightScope Mevo Gen2, Rapsodo MLM2PRO, Garmin Approach R10 and Swing Caddie SC4 PRO.
Foresight Sports QuadMAX, GCQuad and GC3, Garmin Approach R50, Foresight Sports GC3S, Uneekor EYE MINI, Bushnell Launch Pro Circle B Edition, Uneekor EYE MINI LITE, Bushnell LPi Circle B Edition and SkyTrak ST MAX.
The Foresight Sports Falcon takes a 9.5 to 10.5 ft ceiling; the Uneekor EYE XO2, TruGolf APOGEE, ProTee VX, Uneekor EYE XO and EYE XR take 9 to 10 ft. Above that, add the Launch Monitor Ceiling Drop-Mount Kit in the builder.
*Note: BYO Launch Monitor is the default and the package ships without one. The launch monitor comparison lines every unit up by accuracy, placement, software and price, and the golf simulator builder sizes a full setup to your room.

Carl's Place builds the Curved enclosure for DIY assembly. Its screen curves around the hitting area, so the picture fills your peripheral vision.
It uses the same triple-layer screen as Carl's flat enclosures, built to take full-speed drives, on a 2-inch steel EMT frame. Six sizes, each in three depths, made in the USA.
Every depth needs the same 16'0" run, because the enclosure sits inside it. A launch monitor behind the ball needs more: 17 ft for the Garmin R10, 17 ft 6 in for the Rapsodo MLM2PRO, and 19 ft for the FlightScope Mevo Gen2 and Full Swing KIT. It is 20 ft for the FlightScope X3C, which FlightScope places 9 to 14 ft behind the tee, and stays 16 ft for the Swing Caddie SC4 PRO, which sits 5 ft behind the ball.
*Note: Figures are rounded up to the next inch. Enclosure depths are true to size: 105.5, 129.5 and 189.5 in overall, including the 9.5 in backset rear fitting, which the 12 in of clearance covers.

Bought on its own, the Curved kit comes with fittings, and you buy the 2-inch EMT yourself. Here every pipe arrives in the exact length for your enclosure: no cutting. Carl's does not cut the curved pipes down, so the kit ships separately, and it ships free within the contiguous 48 states.
The Safety Baffle hangs above the hitting area and stops a ball that skips off the top of the screen before it reaches the ceiling. Both follow the enclosure size you pick in the builder.

The package ships with the Real Feel Country Club Elite Golf Mat, 5'W x 5'L. Its long, dense fibers let you swing down and through the turf like a fairway, it takes a real wooden tee, and the base absorbs the strike so your joints do not.
Three Fiberbuilt mats are one click away in the builder, or remove the mat if you already have one:

The Tour Landing Pad cushions and quiets balls dropping off the screen, keeps them from scuffing the floor or rolling under the enclosure, and bridges the gap between the mat and the screen. It is not selected by default.
Tick it and the builder preselects the size we recommend, one foot wider than the enclosure, with the length matched to its depth:

The package includes the BenQ LK830ST, a 4K laser with 4,000 lumens and a 0.496:1 throw, the shortest in the builder. Its Warping menu maps the picture onto the curve. The ceiling mount is included.
Upgrades to the 4K BenQ AK700ST and LK936ST are available in the builder. Both warp to the curve as well, and the included ceiling mount fits all three.

Simulation software such as GSPro, E6 Connect and FSX Play needs a gaming-class computer, and the one you pick here arrives ready for it. SurfThing builds them for golf simulation: 32GB DDR5, a 2TB SSD and an NVIDIA RTX 50-series GPU, in a desktop tower or a laptop.
With the desktop PC, add the SurfThing DT2424H 23.8-inch touch screen to start rounds, review data and scrub swing video without walking back to a keyboard. It is not offered with the laptop, which has its own screen.
Before anything ships, the owner, the landlord or the contractor can see the bay as configured: the enclosure, the mat, the projector on its mount and the launch monitor, drawn at real size where they go.
The second gallery thumbnail opens an interactive 3D view of your build at real size, with the launch monitor where it belongs: behind the ball, beside it or overhead. Drag to rotate, pinch or scroll to zoom, open it full screen. Share build saves the configuration to a short topshelfgolf.com link with a picture, for a spouse, a contractor or us, and the link rides along on your cart line and order.
From the moment you first contact us, we offer the very best advice and service to find the right product at the right price. We do not just sell boxes: we help you build the sim room you have been planning.
The base package is a Carl's Place Curved enclosure 14'W x 9'H x 8'D with the triple-layer Premium impact screen (BlackStop ceiling and wall panels, steel fittings and elbows, foam inserts, zip ties and instructions).
It also includes the Pipe Framing Kit and Safety Baffle for that size, a Real Feel Country Club Elite Mat 5'W x 5'L, a BenQ LK830ST 4K short-throw laser projector and its ceiling mount.
A launch monitor, Launch Monitor Ceiling Drop-Mount Kit, back cover kit, back cover pipe kit, landing pad, gaming computer and touch screen are added in the builder.
Twenty-two. Behind the ball: FlightScope X3C, Full Swing KIT, FlightScope Mevo Gen2, Rapsodo MLM2PRO, Garmin Approach R10 and Swing Caddie SC4 PRO.
Beside the ball: Foresight Sports QuadMAX, Foresight Sports GCQuad, Foresight Sports GC3, Garmin Approach R50, Foresight Sports GC3S, Uneekor EYE MINI, Bushnell Launch Pro Circle B Edition, Uneekor EYE MINI LITE, Bushnell LPi Circle B Edition and SkyTrak ST MAX.
Overhead: Foresight Sports Falcon, Uneekor EYE XO2, TruGolf APOGEE, ProTee VX, Uneekor EYE XO and Uneekor EYE XR. Picking one switches the page to that option, so the price and the 3D view match your build.
Overhead units are ceiling-specific: 9 to 10 ft for ProTee VX and TruGolf APOGEE, 9.5 to 10.5 ft for the Foresight Falcon, and 9 to 10 ft for Uneekor EYE XR, EYE XO and EYE XO2.
Above those heights, the builder offers Carl's Launch Monitor Ceiling Drop-Mount Kit, cut for each of those units in 6 in to 9 in, 12 in to 18 in, 2 ft to 3 ft and 3 ft to 5 ft drops, for a level or a sloped ceiling.
Every size needs at least 16'0" of depth; width and height depend on the enclosure: 14'4"W x 9'6"H for the 14'W x 9'H kit, 15'1"W x 10'0"H for the 14.5'W x 9.5'H kit, 15'11"W x 9'6"H for the 15'W x 9'H kit, 15'11"W x 10'6"H for the 15'W x 10'H kit, 16'8"W x 10'0"H for the 16'W x 9.5'H kit, 17'7"W x 10'6"H for the 17'W x 10'H kit.
That is Carl's overall frame plus 3 in on each side and 6 in above. In depth it is Carl's 12 in of clearance behind the screen (which covers the 9.5 in rear fitting), 10 ft from the screen to the tee and 5 ft behind the tee to swing; a deeper enclosure sits inside that run rather than adding to it.
A launch monitor that sits behind the ball replaces those 5 ft with its maker's setback, which makes it 17 ft for the Garmin R10, 17 ft 6 in for the Rapsodo MLM2PRO, and 19 ft for the FlightScope Mevo Gen2 and Full Swing KIT. It is 20 ft for the FlightScope X3C, which FlightScope places 9 to 14 ft behind the tee, and stays 16 ft for the Swing Caddie SC4 PRO, which sits 5 ft behind the ball.
Overhead launch monitors need a 9 to 10.5 ft ceiling depending on the unit.
Before you order, put a ball where the tee will go and take a slow, full swing with your longest club.
Everything in the package plugs into ordinary 120 V household outlets; no dedicated circuit or hardwiring is needed.
The projectors run on a 100 to 240 V supply and draw 212 W (BenQ AK700ST) to 440 W (BenQ LK936ST), a gaming PC is a standard desktop tower or laptop, and the launch monitor runs on a small power adapter or its own battery, so one 15 A circuit carries the whole bay.
Plan an outlet at the ceiling for the projector and one near the tee for the launch monitor and computer.
Pick the widest kit whose room minimum fits: 14'W, 14.5'W, 15'W (9 or 10 ft tall), 16'W or 17'W, each 8, 10 or 15 ft deep. Depths are true to size: 105.5, 129.5 and 189.5 in overall.
A deeper enclosure puts more of the room inside the BlackStop panels, which catch what the screen does not and block more light from the image. All depths need the same room depth, so pick the deepest one your budget clears.
Tick the landing pad and the builder preselects the size we recommend: one foot wider than the enclosure, 15'W for the 14'W kit up to 18'W for the 17'W kit, with the length matched to the depth: 13 ft on an 8 ft or 10 ft deep bay and 16 ft on 15 ft.
The pad starts at the deepest point of the curve, and the tee distance is measured from the leading edge of the screen about 4 ft ahead of it, so the run is longer than on a flat screen of the same depth.
Runs over 8 ft are two pads laid end to end. The Width and Length menus let you go wider or longer, and the width is cut to your exact number after ordering.
The triple-layer Premium screen. It takes real golf balls at full driver speed and it works with every projector offered here.
The High-Contrast Gray screen deepens blacks in a room with ambient light by absorbing that light, so we recommend at least 4,000 lumens with it. It is sold with the standalone Curved enclosure kit, where you pick the projector yourself. In a room you can darken, the white Premium screen gives the better image.
Yes. The standalone Curved kit ships without pipes, but this package includes the Pipe Framing Kit: every 2-inch steel EMT pipe in the exact lengths for your enclosure, plus the fittings. Carl's does not cut the curved pipes down, so the pipe kit ships separately, and it ships free within the contiguous 48 states. Uncheck it only if you are sourcing your own EMT locally.
The Safety Baffle for your enclosure width is included as well, and both follow the size you pick in the builder.
The Back Cover Kit is optional: it closes the back of the enclosure to block light and contain balls. Its pipes are the optional Back Cover Pipe Kit, pre-cut for your enclosure size.
One that throws short and warps in firmware. The included BenQ LK830ST has the shortest throw in the builder at 0.496:1, runs 4,000 lumens at 4K, and its Warping menu maps the picture onto a curved surface across a 5x3 grid; turning Warping on switches off Keystone, Corner Fit, Aspect Ratio, Digital Shrink and Shift, Blanking and Screen Fill.
The builder also offers the BenQ AK700ST 4000-Lumen 4K Laser (0.69-0.83:1 throw) and LK936ST 5100-Lumen 4K Laser (0.81-0.89:1 throw). Both warp on grids up to 24x15 for a larger or brighter picture, but throw longer, so run your bay through our projector calculator and check the projector lands in front of where you will stand.
The included BenQ ceiling mount tilts and rotates for image alignment and fits all three projectors in the builder. Remove the projector and the mount goes with it.
Carl's Universal Projector Mount is in the builder too: flush to a level ceiling, bolted to the enclosure frame, or on a 6 in to 9 in, 12 in to 18 in, 2 ft to 3 ft or 3 ft to 5 ft drop for a level or a sloped ceiling.
The mount distance under each projector in the builder is measured from the viewable screen of the enclosure size you pick, not the frame, using the width across the face of the curve that Carl's publishes for each size, with the 16:9 picture sized to fill that screen. The screen is wider along the curve than across its face.
With the included LK830ST on the base 14'W x 9'H enclosure, that puts the lens about 7.3' from its 13.3' x 8.2' viewable screen. The projector calculator shows the mount distance for any screen size.
When the projector's shape matches the screen, the picture fills it exactly; when it differs, the picture matches the screen on one side and runs past it on the other, and the extra lands past the white screen on the enclosure walls.
That is normal. Set the simulator PC (display or graphics settings) or the projector, if it has a screen-fit setting, to your screen's shape and those strips stay dark.
At least two people and about four hours. Carl's lists a tape measure, pliers, hex keys or a socket set, a cutting tool, a rubber mallet and a step ladder.
The pipes arrive in the exact lengths, the steel fittings and elbows, foam inserts and zip ties are in the box, and the BlackStop panels go on with the supplied zip ties.
Most items ship within 1-3 business days. The hitting mat, projector, projector mount and any launch monitor you add ship separately from the enclosure.
Carl's Place builds each enclosure to order, so lead times vary, and the Curved enclosure ships by ground rather than freight. Expect it to arrive separately from the rest of your order, often in more than one box. The Pipe Framing Kit ships free within the contiguous 48 states, separately from the enclosure. Shipping is free within the contiguous 48 states on most products over $150 (some exceptions apply). We do not ship to Alaska, Hawaii or Puerto Rico.
We're proud to say we are an Authorized Dealer/Distributor for all the brands we carry. All our products come directly from the manufacturer. Your launch monitor, projector and computer are covered by their manufacturer's warranty from the date of the original purchase, subject to its conditions and limitations. Carl's Place screens and enclosure materials are wearable goods, so they do not carry a warranty. Some marking and wear from the first sessions is normal, and how long a screen lasts depends on skill level, how often you play and how it is installed. If something looks unusual rather than like normal wear, send us photos and your order number and we will take it up with Carl's Place.
All impact screen sales are final with no returns. Because fit and material choice matter, measure your space before ordering.
All Foresight Sports sales are final. No returns will be accepted.
We want you to be happy with your purchase and enjoy it for many years to come. If you decide you want to return your product, we will gladly assist you in the process. Please inspect your purchase when your package arrives. Product received damaged must be noted with the freight carrier at time of delivery. Contact us immediately no later than 24 hours from delivery time to report the damage. We cannot accept responsibility for a damaged shipment if it is not noted as such on the freight carrier's delivery receipt. Damage must be noted at the time of delivery.
For additional details about our return process & exceptions for all the items included in the package please see our Return Policy.
Browse every golf simulator package or call us at 1-888-871-6110.